Impinj Guardwall (CP) Indoor RFID Antenna (FCC/ETSI)
The Impinj Guardwall Indoor Antenna is geared toward item-level reading and provides a tightly controlled read zone and intense RF field, critical to penetrating deep into packed cases. When used as a pair, the Guardwall antenna absorbs energy from its opposing mate so that very little passes beyond the exterior face. This configuration maximizes stray read rejection by constraining the read zone to the area within the two antennas. It also increases read reliability by maximizing the intensity within the read zone.
Well-controlled read zone minimizes stray reads.Optimized for reading item-level tags packed in cases. Designed for RoHS compliance.
This antenna may only be used with an Impinj reader or “Powered by Impinj” reader. Using this antenna with any other device voids the antenna warranty and may cause damage to the antenna or device.
We can supply you with ANY length custom cable with ANY type of connectors. If you don't see the cable you need, please contact us so we can assist you.
Operating Frequency: US (902-928 MHz), EU (865-868 MHz)
Polarization: Right hand and left hand circular
Gain: 6.0 dBi
Max Read Distance: N/A
Elevation Beam width: 55°
Azimuth Beam width: 55°
Connector Type:Two (2) SMA female (connects to SMA male)
Cable:Two 6 ft antenna cables (SMA Male to RP-TNC Male)
Mounting: Brackets sold separately
Dimensions:27.6 x 15.8 x 2.9 in. (702 x 402 x 73 mm)
Weight:11 lbs (4989.5 g)
ENVIRONMENT:IP Rating:IP 51
Operating Temperature:0° to 40 C°