| | MB200i | MB201i | | Printing Method: | Direct Thermal | | Print Resolution: | 203 dpi (8 dots/mm) | | Printing Speed: | Up to 4 inches per second (103 mm/sec) | | Max. Print Area: | 1.89" (48mm) W x 6.3" (160mm) L | | Media Size: | 25.4~55mm W x 13~160mm L x 0.064~0.19 Thickness |
MEDIA SPECIFICATION Sensor Type
I-Mark sensor for use with pre-printed marks.
See through sensor for die-cut label with gap. Dispenser sensor Media Type
Roll die-cut label with gap or pre-printed label, 2 colour direct thermal, Linerless media Thickness
0.064 ~ 0.19 mm Outer Diameter
MB200i: Ø 67 mm
MB201i: Ø 58 mm Inner Diameter
19.05 mm / 25.4 mm (core) or 8 mm (coreless) FONT / SYMBOLOGIES Fonts Internal
XU, XS, XM, XB, XL, POP, OCR-A/B and Kanji Barcode Symbologies
Linear: EAN 8/13, UPC - A/E. NW -7, *RSS-14, Postnet, Inter-leaved 2 of 5 (ITF), CODE 39, CODE
93, CODE 128
2-Dimensional: PDF417 (ver 2.4), QR Code (ver 8.1), Maxi Code (ver 3.0) and Data Matrix code (ECC 200)
ver 2.0 INTERFACE CHARACTERISTICS Interface Options
RS232C, IrDA [Ver.1.2; Protocols: Standard, BHT, IrCOMM, IrOBEX (option)], Bluetooth
ver1.1, IEEE802.11b Wireless LAN. OPERATING CHARACTERISTICS Battery
7.4 V (2400mAh) Lithium ion Environment
Operating: -15 ~ 50ºC / 20 ~ 80% RH (w/out condensation)
Storage: -25 ~ 60ºC / 20 ~ 80% RH (w/out condensation) Dimension
MB200i: W88 x D128 x H73 mm / Approx. 405g with battery installed
MB201i: W88 x D119 x H64 mm / Approx. 390g with battery installed ACCESSORIES AC Adapter, RS232 cable, Battery Charger (single or up to 5 batteries), Battery pack, Water Protective Case, Shoulder Strap and Belt clip OPERATIONAL FEATURES Useful Features
Auto Power Save. Printer goes to sleep mode when idle for 5 seconds.
Printer will power off automatically when idle for another 5 minutes.
(Programmable auto power off interval) Self Diagnosis Tools
Head Check, Battery Check, Paper End Detection, Head Open, Test Print.
MB200 has additional overcharge/over discharge protection.
|
