iData iData T3 Pro HC HealthCare Android 13.0 5.50" Touch Screen Mobile Computer is a rugged, enterprise-level smart terminal designed specifically for healthcare environments, featuring specialized housing to withstand repeated, rigorous cleaning with disinfectants. It runs on a modern Android operating system, supports rapid 1D/2D barcode scanning (including for curved surfaces like test tubes or wristbands) and includes NFC for patient/staff identification

Longer battery life with 5000mAh capacity - The large 5000mAh battery design can survive a whole-day for parcel collecting and delivery. There’s no need to shut down the device while replacing the battery. Furthermore, the powerful protection can effectively lower the risk of accidental downtime during operation. 

Performance built for multi-tasking - The high-performance Octa-core 2.2GHz processor, with 6nm technique, exceeding 300,000 points in AnTuTu benchmarking, making multi-tasking smoother than ever; Equipped with the latest Android 13.0(AER), front-line workers can enjoy the usage experience like any other mainstream smartphone; Besides, a Larger memory and flash memory support allow workers to preinstall and run more programs to obtain business support.

Uses & Applications in HealthCare:
    Patient Care: Accessing medical records, scanning wristbands for identification, and bed-side medication administration.
    Laboratory & Pharmacy: Managing samples, tracking drugs, and inventory control.
    Asset Management: Tracking hospital equipment

iData T3 Pro HC HealthCare Product Specification:
System Configuration:                                                            
Processor     Octa-core 2.2GHz high-performance processor
Operating System     Android 13.0（AER）
Memory (ROM + RAM)     64GB + 4GB (standard), 128GB+6GB (optional)
SIM (eSIM: not supported)     Two out of three SIM card slots, support dual SIM and dual standby * Two out of three SIM card slots: two cards can be held at the same time, Nano SIM card + Nano SIM card /Nano SIM card +TF cardWIFI ONLY version: No SIM, Not supported
Expansion Slot     Micro SD card (up to 2 TB)
Display Screen     5.5-inch, resolution: 1440*720 pixels IPS HD screen
Touch Screen     Industrial capacitive screen, support wet-hand operation/glove mode/multi-touch/gesture operation
Camera     13 megapixels rear camera, support PDAF(standard); 5 megapixels frontcamera 16 megapixels rear camera, support PDAF(optional); 5 megapixels frontcamera
Flashlight     1A flashlight
Keypad     5 keypads in total: scan key *2, power key *1, ±volume key *2
Battery     3.85V lithium battery, with 5000 mAh, detachable *Execution standard: GB31241-2014
Audio     Built-in microphone
Charging Method     Type-C charging , support 9V/2A, 5V/3A fast charging
Reminder     High-power speaker/Vibration reminder/LED reminder
Vibrating Motor     Built-in vibrating motor
Sensors     G-sensor/ Proximity sensor/Light sensor
Intercom Function (Optional)     Support one-button PTT calls

Structure Parameter:                                                            
Dimension (L*W*D)     162.2mm*78.5mm*15mm
Weight     288g (including the battery)

Communication Transmission:                                                            
WWAN (Network Frequency)     Global Version 2G:B2/B3/B5/B83G:WCDMA:B1/B2/B4/B5/B6/B8/B194G:FDD-LTE：B1/B2/B3/B4/B5/B7/B8/B12/B17/B20/B28A/B28B/B66 TDD-LTE：B34/B38/B39/B40/B41WIFI ONLY version: Not supported
WWAN (Data Service)     GSM/GPRS/EDGE/UMTS/HSPA/HSPA+/WCDMA/TD-SCDMA/TDD-LTE/FDD-LTE WIFI ONLY version: Not supported
WLAN Function     Wi-Fi 802.11 a/b/g/n/ac/d/e/h/i/j/k/r/v/w(dual-band Wi-Fi: 2.4G+5G), support fast roaming, Wi-Fi 5
Bluetooth     Bluetooth 5.2, support BLE
GPS     GPS/GLONASS/BDS/AGPS/Galileo/QZSS

Environmental Parameter:                                                             
Working Temperature     -20℃ – 50℃ *Do not charge under low temperature conditions for the safety concerns
Storage Temperature     -40℃ – 70℃
Humidity     0 – 95% (no moisture condensation)
Drop Specification     Multiple drops to concrete floor from the height of 1.5m
Environmental Parameter     500 times circulation (1000 times) of roller drops from a height of 0.5 meter
Ingress Protection     IP65/IP67
ESD Protection     ±15KV (air discharge), ±8KV (contact discharge)

Barcode Scanning Engine:                                                             
Barcode Type     It can scan one-dimensional / two-dimensional barcodes (2D Barcodes)
Scanning Accuracy     ≧3.33mil
Scanning Angle     Pitch: ±60°； Skew：±45°； Tilt：360°
View Angle     Horizontal：44.3°，Vertical：28.4°，Diagonal：51°
Motion Error Tolerance     8m/s

RFID NFC (Optional):                                                            
Working Frequency     HF-13.56MHz
Reading Distance     Within 35 mm
Communication Protocol     ISO14443A/14443B/15693

Communication Interface:                                                            
USB Interface     Type-C (with headset function) *1
OTG Interface     Support

Development Support:                                                            
Programming Language     Java
Development API     iScan API (Scanning Development Kits), Device API (Device Management/Configuration Development Kits), Android Standard Interface
Development Tool     Eclipse/Android Studio

Accessories:                                                            
Accessories (standard)     USB cable*1, hand strap *1, back strap *1, power adapter*1, battery*1
Accessories (optional)     Single charging cradle, 4-slot charging cradle, 4-slot battery charging cradle, fanny pack, protective film, protective case
T3 HC Accessories
T3 Pro Protective Film
Protective film for touchscreen. It can protect the screen from cracking or being scratched in case there’s any accidental drops or impact during usage.
Product code: 301070015
T3 Pro 4-Slot Charging Cradle
Support maximum charging of devices at the same time. Support plug types of China/Europe/UK/US/Australia
Product code: C01010749
T3 Pro – Protective Case
Protective case for the main unit. It can prevent the malfunction of main unit in case there’s any accidental drops or impact during usage
Product code: 301100030
T3 Pro – Pistol Grip
Pistol grip for main unit. Execute barcode scanning by pressing the grip trigger. Only those main units with pin port on the back are compatible
Product code: C01010500
T3 Pro – 4-slot Battery Charging Cradle
Support maximum charging of 4 batteries at the same time. Support plug types of China/Europe/UK/US/Australia
Product code: 301010161
T3 Pro – 2 in 1 Charger
Supports charging one PDA and one battery simultaneously, compatible with protect case
The power adapter can be selected from EU/UK/US standards.