FEIG ID LRU1002XIndustrial UHF Long Range Reader allows upto 4 antennas for applications in the industrial environment for applications in harsh industrial and railway environment FEIG’s UHF Long Range Reader LRU1002 now also offers robust M12 and M8 connectors. Applications in logistics In logistics applications, too, there are often harsh environ-mental conditions. The LRU1002X is therefore the first choice for use in forklifts or conveyor systems for
FEIG ID LRU1002XIndustrial UHF Long Range Reader allows upto 4 antennas for applications in the industrial environment for applications in harsh industrial and railway environment FEIG’s UHF Long Range Reader LRU1002 now also offers robust M12 and M8 connectors. Applications in logistics In logistics applications, too, there are often harsh environ-mental conditions. The LRU1002X is therefore the first choice for use in forklifts or conveyor systems for identification of UHF transponders frequency of 860-960 MHz.
The UHF Long Range Reader ID ISC.LRU1002 is a high performance Long Range Reader that can be used in different kind of applications.
FEIG ID LRU1002X 4-Port UHF RFID Long Range Reader convinces with an excellent price performance ratio and is characterized by the following features:
- High receiver sensitivity cares for an enlarged and at the same time homogeneous tag detection range
- Possible secure read range of up to 12 m (40 ft) *
- Constant high receive sensitivity and high read range also in disturbed environments and applications with a large number of readers operating at the same time
- Support of Transponders according to EPC Class1 Gen2 and ISO 18000-6-C
- Allows the realization of secure UHF systems by full support of new transponder chips according to EPC Class1 Gen2 V2 specification and ISO 29167 (e.g. NXP UCODE DNA)
- Secure storage of application keys in a secure memory (Secure Element)
- Support of EPCglobal™ Low Level Reader Protocol with special software library
- Readout of RSSI data and phase angle of identified transponders (e.g. for localization of transponders)
- Various configuration options for software and hardware
- Support of 4 hardware interface ports: Ethernet, RS232, USB and Wiegand
- Reader protection against fault conditions like antenna shortcut, antenna mismatching and electrostatic discharge
- Robust aluminum die case housing for usage in rough and industrial environments
- Increase of enclosure rating to IP 64 due to optional available connector sealing cap for the connector block
- Quick installation due to easy access to interfaces and antenna ports
- 2 Inputs, 2 outputs and 2 relay outputs suit industrial needs and allow control of external components and signalization of different events
- Antenna Port Indication: Display of active antennas (green), read events (blue) and possible antenna mismatching (red) via 4 separate LED ́s
Typical Application
- Automatic Vehicle Identification (AVI)
- Road Tolling
- Logistics
- Forklifts
- Industry
- Automotive
- Traffic Monitoring
- Traffic Management Systems
- Parking Slot Management
- Laundry Services
- Waste Management
Size/Dimensions: 260 x 157 x 65 mm (10.23 x 6.18 x 2.56 inch) amd connection of up to 4 antennas and interfaces: RS232, Ethernet, USB, Wiegand which has power supply: 24V DC +/- 20% and is supported transponders: EPC C1G2, EPC C1G2 V2, ISO 18000-6C
Features: Robust metal housing with M12 and M8 connectors
2 Watt output power
High receive sensitivity
4 antenna ports (internal Multiplexer)
6 Inputs / Outputs
Secure key storage (Secure Element)
Full support of new transponder chips with encryption (NXP UCODE DNA)
Support of EPC Low Level Reader Protocol (LLRP) with software library
Output of RSSI values and phase angle
Extended conformity for rail applications
Fields of uses & applications:
Industrial
Rail
Logistics
Dimensions (w x h x d) 260 mm x 157 mm x 65 mm
Weight approx. 1,800 g
Housing Aluminum, powder coated
Colour anthracite
Protection class IP53 (IP64 with protection cap*)
Power supply 24 V DC ±20 %
Power consumption max. 24 VA**
Operating frequencies
Version EU 865 MHz up to 868 MHz
Version FCC 902 MHz up to 928 MHz
Output power 100 mW to max. 2 W configurable in steps of 100 mW
Antenna connector 4x SMA-Female (50 Ohm), integrated Multiplexer, support of
external Multiplexer ID ISC.ANT.UMUX
RF-diagnosis RF-channel monitoring, Antenna SWR control,
internal overheating control
Connections I/O M8 (8-pin), RS232 / relay M8 (8-pin),
Ethernet M12, power supply M8 (4-pin)
Outputs
2 Optocoupler max. 24 V DC / 20 mA
2 Relays max. 24 V DC / 1 A switching current, 2 A permanent current
Inputs
2 Optocoupler max. 24 V DC / 20 mA
Interfaces RS232, Ethernet, USB (On-The-Go),
Wiegand (Scan Mode Interface)
Reader modes ISO Host Mode, Scan Mode (HID), Notification Mode,
Buffered Read Mode
Supported transponders EPC Class1 Gen2, EPC Class1 Gen2 V2, ISO 18000-6C
Indicator 16 LEDs for diagnosis of reader operation and antenna status
Others Anti-Collision, Output of RSSI values and phase angle, Battery
assisted Real Time Clock, Supports encrypted transponder
communication, Secure Key Storage, “Config Cloning” function
Temperature range
Operation −25 °C up to +55 °C
Storage −25 °C up to +85 °C
Relative air humidity 5 % up to 95 % (non-condensing)
Vibration EN 60068-2-6 10 Hz up to 150 Hz: 0.075 mm / 1 g
Shock resistance EN 60068-2-27 Acceleration: 30 g
FEIG ID LRU1002X UHF RFID Long Range Reader UHF transponders frequency 860-960 MHz, Size/Dimensions: 260 x 157 x 65 mm (10.23 x 6.18 x 2.56 inch), Connection of up to 4 antennas, Interfaces: RS232, Ethernet, USB, Wiegand, Power supply: 24V DC +/- 20%, Supported transponders: EPC C1G2, EPC C1G2 V2, ISO 18000-6C