FEIG ID MAX.U1002 Vehicle Access Control UHF RFID Fixed-Mount Reader
ID MAX.U1002 is a UHF Vehicle Access Control ReaderUHF RFID Ultra High Frequency 860–960 MHz that combines the features of a RFID reader and an access controller in one device. Place of use is everywhere where vehicles should be granted permanent access to employee parking lots, driveways to companies, authorities or other closed facilities (Perimeter Protection).For identification of a vehicle in connection with the ID MAX.U1002 passive, maintenance-free UHF
ID MAX.U1002 is a UHF Vehicle Access Control ReaderUHF RFID Ultra High Frequency 860–960 MHz that combines the features of a RFID reader and an access controller in one device. Place of use is everywhere where vehicles should be granted permanent access to employee parking lots, driveways to companies, authorities or other closed facilities (Perimeter Protection).
For identification of a vehicle in connection with the ID MAX.U1002 passive, maintenance-free UHF transponders are used, which can be stuck behind the windscreen of the vehicle. Supporting encryption techniques according to EPC Class 1 Gen 2 V2 specification like NXP UCODE DNA allows a secure authentication of detected transponders and prohibits access of transponders with cloned serial numbers.With ID MAX.U1002 more than 4.000 access permissions can be managed and approx. 3.000 access control events can be stored. Each user can be assigned to additional temporal restrictions.
Holidays and vacation days can be included, easily.To monitor multiple lanes or the simultaneous checking of entry and exit, there are one antenna port and two digital outputs available, alternatively two relays as signal transmitter for barrier- or gate control units. ID MAX.U1002 is powered by external antennas, allowing the reader to be mounted in a safe environment and preventing unauthorized access.Programming & AdministrationUsing the software myAXXESS Manager, user data and authorizations can be easily administrated and transferred to ID MAX.U1002 by using a temporary connection.
After this synchronization, the reader can run offline as a stand-alone device.With the help of a USB stick, the event buffer as well as the entire configuration including the access authorization can be read out on the ID MAX.U1002. The simple "configuration cloning" allows this configuration to be conveniently copied to other devices by the same route.
The "Teach-In Mode" is used to teach the transponders to be accessed without the use of the software. If the reader is in this mode, all read transponders are automatically transferred to the access database.Loop detectors and motion detectors as useful accessoriesLoop detectors and motion detectors as pulse for starting the identification process do not only ensure an energy efficient operation of ID MAX.U1002. They also guarantee that always the right barrier or door is opened when several lanes exist. For this ID MAX.U1002 offers a digital inp
Access control systems on buildings and parking areas should be as uncomplicated as possible. myAXXESS is the secure, powerful and economic solution for small and medium-sized projects. Both in a stand-alone systems and integrated into existing access solutions.As a RFID specialist, FEIG ELECTRONIC offers systems from a single source, consisting of:- RFID hardware for short-range solutions (HF)- RFID hardware for long-range solutions (UHF)- Software myAXXESS Manager for administration of access authorizations- Transponders for granting authorizations (HF chipcards and UHF wind shield transponders)
Combination of UHF Long Range Reader and Access Controller- Management of more than 4.000 access permissions- Simultaneous monitoring of up to 2 lanes with readranges of up to 12 m- Non-volatile event memory, buffered real time clock and Teach-in-mode- Quick and easy update of authorization data via Ethernet interface- Secure Key Storage (Secure Element)- USB service interface- Anti Passback
Programming & AdministrationUsing the software myAXXESS Manager, user data and authorizations can be easily administrated and transferred to ID MAX.U1002 by using a temporary connection. After this synchronization, the reader can run offline as a stand-alone device.
With the help of a USB stick, the event buffer as well as the entire configuration including the access authorization can be read out on the ID MAX.U1002. The simple "configuration cloning" allows this configuration to be conveniently copied to other devices by the same route.
The "Teach-In Mode" is used to teach the transponders to be accessed without the use of the software. If the reader is in this mode, all read transponders are automatically transferred to the access database
