Ultra-thin stationary scanner that can be installed anywhere for Readable and writable UHF RFID tags to standard of ISO/IEC18000-63 TypeC (EPCglobal Class1 Gen2) -supported Tag of Frequency of 865.7–867.5 MHz with Serial RS232C or Etherrnet LAN different models: (RS-232C/USB model - UR21-MR-01 or (Ethernet/USB model - UR22-MR-01(1)Can be additionally installed on an existing register - The combination of a small controller and a thin antenna eliminates
Ultra-thin stationary scanner that can be installed anywhere for Readable and writable UHF RFID tags to standard of ISO/IEC18000-63 TypeC (EPCglobal Class1 Gen2) -supported Tag of Frequency of 865.7–867.5 MHz with Serial RS232C or Etherrnet LAN different models: (RS-232C/USB model - UR21-MR-01 or (Ethernet/USB model - UR22-MR-01(1)
Can be additionally installed on an existing register - The combination of a small controller and a thin antenna eliminates problems in fi nding an installation location. A dedicated antenna fi xture, which is useful in installing the antenna, is also offered.
No need to worry about reading products on adjacent checkout counters. The communication range is approximately 80 cm, which is ideal for the environment for POS registers. To prevent reading RF tags of products on adjacent checkout counters, the communication range can be adjusted arbitrarily according to the use environment.
Two antennas can be connected to one controller, covering a wider range and expanding customer use range - By using two antennas, the reading area can be expanded to ensure 100% read rate.
To eliminate the time for reading at the time of storage and retrieval - Ideal for installation at a storage/retrieval gate - The communication range is approximately 2.5 meters. With this long-distance reading capability, even when the scanner is installed at the upper part of a gate, it can smoothly read even RF tags that are attached to cargo at workers’feet. Furthermore, a circular polarized antenna enables 360-degree reading of RF tags, so users do not have to care about directions of RF tags. The communication range can be changed freely, enabling adjustment of the range according to the use environment.
Several devices can be controlled by a single PC - By using an Ethernet interface, several devices can be controlled by a single PC. Furthermore, an Ethernet interface can connect a PC and devices even if they are distanced from each other.
Can be retrofitted anywhere - The combination of a small controller and a thin antenna eliminates problems in finding an installation location. VESA-compliant screw holes and supplied screws for securing the antenna make it easy to install this product on a VESA-compliant fixed stand.
